A furnace rarely quits all at once. It usually tells you first, through bigger repair bills, higher gas or propane costs, and rooms that never quite warm up. This guide covers the signs it’s time to replace your furnace, how to weigh one more repair against a new system, and what furnace replacement typically costs in the Asheville area.
How do you know it’s time to replace your furnace?
American Air recommends looking at replacement once a gas furnace passes about 15 years old and starts needing regular repairs. Most gas furnaces last 15 to 20 years, so a furnace in that window with a growing repair history is near the end of its useful life. Other signs we look for on service calls:
- Repairs every winter. One repair is normal. A new part every season is a pattern.
- Heating bills climbing while your thermostat settings stay the same.
- Uneven heat, with some rooms cold and others too warm.
- New noises like banging, rattling, or squealing when the burners light or the blower runs.
- A cracked heat exchanger. This one is a safety problem, not a comfort problem. A crack can let combustion gases, including carbon monoxide, into your home’s air.
If your furnace is under 10 years old and one of these shows up, a repair is usually the right call.
Should you repair or replace your furnace?
A simple rule: if a repair costs more than about 40% of the price of a new furnace, replacement is usually the better use of your money. American Air uses that rule because it accounts for what you’d be spending to keep an aging system alive for one more season.
A second quick check is the age-times-cost test. Multiply your furnace’s age by the repair estimate. If the result is over $5,000, lean toward replacing. An 18-year-old furnace facing a $350 repair scores 6,300, which points toward replacement. An 8-year-old furnace with the same repair scores 2,800, which points toward the fix.
Safety overrides both rules. If a technician finds a cracked heat exchanger, the furnace should stay off until it’s replaced or the heat exchanger is replaced. When the furnace is older, replacing the whole unit almost always makes more sense. If it still has good life left, we’ll tell you and fix it.
How much does furnace replacement cost in Asheville?
Most gas furnace replacements in the Asheville area run roughly $4,000 to $9,500 installed. Standard 80% AFUE furnaces sit toward the lower half of that range. High-efficiency condensing furnaces (95% AFUE and up) sit toward the upper half. Replacing the furnace and air conditioner together typically runs $10,000 or more.
What moves your price within that range:
- Size. The furnace has to match your home’s heating load. Bigger isn’t better: an oversized furnace short-cycles, wears faster, and heats unevenly.
- Efficiency. Higher AFUE costs more up front and less to run.
- Venting. Moving from an 80% furnace to a 90%+ model usually means new PVC venting and a condensate drain.
- Fuel. Many homes outside the city are on propane rather than natural gas. A propane furnace needs the right conversion setup.
- Ductwork and access. Damaged ducts, tight crawlspaces, and attic installs add labor.
Every home is different, so the only accurate number is an in-home estimate. American Air provides free quotes for furnace replacement.
Is an 80% or 90%+ furnace better for an Asheville home?
For most Asheville homes that will keep the system for 15 years or more, a high-efficiency furnace is worth a serious look. AFUE (annual fuel utilization efficiency) is the share of your fuel that becomes heat. An 80% furnace turns 80 cents of every fuel dollar into heat. A 95% furnace turns 95 cents into heat, which means it burns about 16% less fuel for the same warmth.
Our winters make that difference count. According to NOAA’s 1991-2020 climate normals, Asheville needs about 25% more heating in a typical year than Charlotte, so a furnace here runs longer and the efficiency savings add up faster. An 80% furnace can still make sense in a smaller home, a home you plan to sell soon, or where adding new venting would be difficult. For a deeper comparison, see our guide to the differences between 80% and 90% furnaces.
Gas furnace, heat pump, or dual fuel for a mountain home?
A new gas furnace isn’t the only option when your old one wears out. Many Western North Carolina homes use a heat pump, or a dual fuel system that pairs a heat pump with a gas or propane furnace.
- Gas or propane furnace: strong, fast heat on the coldest nights. Pairs with a separate air conditioner for summer.
- Heat pump: heats and cools with one outdoor unit. It works well through most of an Asheville winter, and cold-climate models hold up in much colder weather than older heat pumps did.
- Dual fuel: the heat pump handles mild days, and the furnace takes over when temperatures drop. Your system uses whichever fuel is cheaper to run at that outdoor temperature.
If your air conditioner is also near the end of its life, it’s worth pricing a heat pump or dual fuel system alongside a furnace-plus-AC replacement. We’ll lay out both so you can compare.
What does a new furnace installation include?
A proper furnace replacement from American Air starts with sizing the new system to your home rather than copying the old furnace’s size. From there, a typical installation includes:
- Removing and disposing of the old furnace
- Setting the new furnace and connecting gas or propane, electrical, and ductwork
- Venting to match the furnace type, including PVC venting and a condensate drain for high-efficiency models
- Setting the furnace up for your elevation. Much of the Asheville area sits above 2,000 feet, where gas furnaces generally need adjusting for thinner air
- Testing safety controls, gas pressure, and airflow, and walking you through the new thermostat
Most straightforward furnace swaps take one day. Jobs that change venting or ductwork can run longer. New installations that are registered with the manufacturer come with a 10-year parts warranty, and we offer financing on qualified systems, subject to credit approval.
Frequently Asked Questions
How long does a furnace last in Asheville?
Most gas furnaces last 15 to 20 years. Annual maintenance, clean filters, and correct sizing push a furnace toward the long end of that range. A furnace that skipped tune-ups or was oversized for the home often wears out sooner.
Is it worth repairing a 20-year-old furnace?
Usually not, unless the repair is small and a technician confirms the heat exchanger is sound. At 20 years, the furnace is at or past its expected life, and another repair often just delays a replacement by a season. If the repair is more than about 40% of the cost of a new furnace, replace it.
Can a cracked heat exchanger be repaired?
A cracked heat exchanger can’t be safely patched. The fix is replacing the heat exchanger or the whole furnace. On an older furnace, replacement is almost always the better value, and the furnace should stay off until the work is done.
How long does furnace replacement take?
American Air completes most furnace replacements in one day. Installs that need new venting, a fuel conversion, or ductwork changes can take longer, and we’ll tell you the timeline when we quote the job.
Does American Air offer financing on a new furnace?
Yes. American Air offers financing on qualified new systems, subject to credit approval. Ask about current terms when we give you your quote, or see our current specials.
Get a Straight Answer on Your Furnace
If your furnace is getting older, noisier, or more expensive to keep running, let us take a look. We’ll check what’s wrong, tell you honestly whether a repair makes sense, and give you a free quote if replacement is the better path. Call American Air at (828) 665-8000 or request your estimate online. Learn more about our heating installation services in Asheville.
